manualshive.com logo in svg

BMW X5 2013, Owner'S Manual

The BMW X5 2013 Owner's Manual is your comprehensive guide to operating and maintaining your luxury SUV. Easily download this essential manual for free from manualshive.com and gain detailed insights on every aspect of your BMW X5 2013, ensuring a seamless driving experience from day one.

Share
Download
background image

Dynamic Performance

Control

The Dynamic Performance Control increases
both the agility of the vehicle as well as the
lane stability.
The system seamlessly handles the distribu‐
tion of the drive torque between the two rear
wheels.
Depending on the situation, the drive torque is
shifted from the wheel on the inside of the
curve to the wheel on the outside of the curve
or vice-versa.
To increase the maneuverability, the rear
wheel on the outside of the curve is acceler‐
ated when the driving style is correspondingly
sporty.
The steering responds directly; simultane‐
ously, the understeering tendency of the four-
wheel drive is canceled out.
With the oversteering tendency, the system
exerts a stabilizing effect by accelerating the
rear wheel on the inside of the curve.
The system noticeably improves the traction
and simultaneously increases the driving
safety, especially on road surfaces having fluc‐
tuating coefficients of friction.

DSC Dynamic Stability

Control

The concept

DSC prevents traction loss in the driving
wheels when driving away and accelerating.
DSC also recognizes unstable vehicle condi‐
tions, such as fishtailing or nose-diving. Sub‐
ject to physical limits, DSC helps to keep the
vehicle on a steady course by reducing engine
speed and by applying brakes at individual
wheels.

Adjust your driving style to the situation
An appropriate driving style is always the

responsibility of the driver.
The laws of physics cannot be repealed, even
with DSC.
Therefore, do not reduce the additional safety
margin by driving in a risky manner.◀

Indicator/warning lamps

The indicator lamp flashes: DSC con‐
trols the drive forces and brake forces.
The indicator lamp lights up: DSC has

failed.

Deactivating DSC: DSC OFF

When DSC is deactivated, driving stability is
reduced during acceleration and when driving
in bends.
To increase vehicle stability, activate DSC
again as soon as possible.

Deactivating DSC

Press and hold the button, but not lon‐
ger than approx. 10 seconds, until the

indicator lamp for DSC OFF lights up in the in‐
strument cluster and DSC OFF is displayed.
The DSC system is switched off.

Activating DSC

Press the button.
DSC OFF and the DSC OFF indicator

lamp go out.

Indicator/warning lamps

When DSC is deactivated, DSC OFF is dis‐
played in the instrument cluster.

The indicator lamp lights up: DSC is
deactivated.

Seite 128

Controls

Driving stability control systems

128

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Reviews:

No comments

Related manuals for X5 2013

Yakima K343 Manual preview
K343
Brand: Yakima Pages: 11
Feniex AM600 Instruction Manual preview
AM600
Brand: Feniex Pages: 6
GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Brand: GMC Pages: 20
Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Subaru 360 Sedan Service Manual preview
360 Sedan
Brand: Subaru Pages: 16
RBO RBO4038 Product Manual preview
RBO4038
Brand: RBO Pages: 15
TrailFX 2123131 Quick User Manual preview
2123131
Brand: TrailFX Pages: 2
Magneti Marelli Obd Road User Manual preview
Obd Road
Brand: Magneti Marelli Pages: 9
QA1 GS501 Installation Instructions preview
GS501
Brand: QA1 Pages: 3
Honda 2000 RL Owner'S Manual preview
2000 RL
Brand: Honda Pages: 330
Haltech PLATINUM HT051202 Quick Start Manual preview
PLATINUM HT051202
Brand: Haltech Pages: 10
Chrysler DODGE AD100 1993 Service Manual preview
DODGE AD100 1993
Brand: Chrysler Pages: 1502
Edelbrock 71883 Installation Instructions preview
71883
Brand: Edelbrock Pages: 4
Or-Fab 82301 Installation Instructions preview
82301
Brand: Or-Fab Pages: 3
Dodge 2005 Sprinter User Manual preview
2005 Sprinter
Brand: Dodge Pages: 60
Or-Fab 83228 Installation Instructions preview
83228
Brand: Or-Fab Pages: 5

Brands by name

Popular brands

Load more brands