manualshive.com logo in svg

BMW X5 2013, Owner'S Manual

The BMW X5 2013 Owner's Manual is your comprehensive guide to operating and maintaining your luxury SUV. Easily download this essential manual for free from manualshive.com and gain detailed insights on every aspect of your BMW X5 2013, ensuring a seamless driving experience from day one.

Share
Download
background image

Headlamp glass

Condensation can form on the inside of the ex‐
ternal lamps in cool or humid weather. When
driving with the light switched on, the conden‐
sation evaporates after a short time. The head‐
lamp glasses do not need to be changed.
If the headlamps do not dim despite driving
with the light switched on, increasing humidity
forms, e. g. water droplets in the light, have the
service center check this.

Headlamp setting

The headlamp adjustments can be affected by
changing lamps and bulbs. Therefore after a
change, have the headlamp setting checked
and corrected by Service.

Front lamps, bulb replacement

At a glance

Xenon headlamps

1 Corner-illuminating lamps
2 Parking lamps / daytime running lights
3 Low beams/high beams/headlamp flasher
4 Turn signal/side marker light

Xenon headlamps

Because of the long life of these bulbs, the
likelihood of failure is very low. Switching the
lamps on and off frequently shortens their life.
If a xenon bulb fails, switch on the front fog
lamps and continue the trip with great care.
Comply with local regulations.

Do not perform work/bulb replacement
on xenon headlamps

Have any work on the xenon lighting system,
including bulb replacement, performed only by
a service center. Due to the high voltage
present in the system, there is the danger of
fatal injuries if work is carried out improperly.◀

For checking and adjusting headlamp aim,
please contact your BMW center.

Xenon headlamps

Low beams and high beams are designed with
xenon technology.
The parking lamps and daylight running lights
are made using LED technology.
Contact your service center in the event of a
malfunction.

LED headlamps

Light-emitting diodes (LEDs)

Follow the general instructions on Lamps and
bulbs, refer to page 

223

.

With LED headlamps, all front lamps and side
indicators are designed with LED technology.
If an LED fails, switch on the front fog lamps
and continue the trip with great care. Comply
with local regulations.
Contact your service center in the event of a
malfunction.

Front fog lamps

Follow the general instructions on Lamps and
bulbs, refer to page 

223

.

Front fog lamps in vehicles equipped with
Adaptive Light Control: 55-watt bulb, H11.
Front fog lamps without Adaptive Light Con‐
trol: 35-watt bulb, H8.

1.

Insert the screwdriver from the onboard
vehicle tool kit, with the flat side facing out‐

Seite 224

Mobility

Replacing components

224

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Reviews:

No comments

Related manuals for X5 2013

ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Camcar 40104 Mounting Instructions preview
40104
Brand: Camcar Pages: 6
Dakota Digital VHX-37F Installation preview
VHX-37F
Brand: Dakota Digital Pages: 2
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Brand: Dakota Digital Pages: 7
Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Yakima RoadShower 10G Quick Start Manual preview
RoadShower 10G
Brand: Yakima Pages: 12
Axxess AX-AM-AU92 Installation Instructions Manual preview
AX-AM-AU92
Brand: Axxess Pages: 8
Metra Electronics 99-7477 Installation Instructions preview
99-7477
Brand: Metra Electronics Pages: 2
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4
Nav TV NTV-KIT850 Install Manual preview
NTV-KIT850
Brand: Nav TV Pages: 11
Yakima K1043 Manual preview
K1043
Brand: Yakima Pages: 10
Blitz BZCAPT30 User Manual preview
BZCAPT30
Brand: Blitz Pages: 4
Fortin EVO ONE THAR-GM7 Installation Instructions Manual preview
EVO ONE THAR-GM7
Brand: Fortin Pages: 11

Brands by name

Popular brands

Load more brands