BMW X5 2013 Owner'S Manual Download Page 218

Page: 218 / 257

"Measure engine oil level"

"Start measurement"

The oil level is checked and displayed via a
scale.
Duration: approx. 1 minute.

Adding engine oil

Filler neck

When the indicator lights up in the instrument
cluster, add 1 US quart/liter of engine oil within
the next 125 miles/200 km.

Protect children
Keep oil, grease, etc., out of reach of chil‐

dren and heed the warnings on the containers
to prevent health risks.◀

Oil types for refilling

Hints

No oil additives
Oil additives may lead to engine dam‐

age.◀

Viscosity grades for engine oils
When selecting an engine oil, ensure that

the engine oil belongs to one of the viscosity
grades SAE 0W-40, SAE 0W-30, SAE 5W-40,
and SAE 5W-30 or malfunctions or engine
damage may occur.◀

The engine oil quality is critical for the life of
the engine.
Some types of oils in some cases are not avail‐
able in all countries.

Approved oil types

Gasoline engine

BMW High Performance SAE 5W-30.

BMW Longlife-01.

BMW Longlife-01 FE.

Additional information about the approved
types of oils can be requested from the service
center.

Alternative oil types

If the approved engine oils are not available, up
to 1 US quart/liter of an oil with the following
specification can be added:

Gasoline engine

API SM or superior grade specification.

Oil change

An oil change should be carried out by your
service center only.

Seite 218

Mobility

Engine oil

218

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands

BMW X5 2013, Owner'S Manual

Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands