BMW X5 2013 Owner'S Manual Download Page 169

Page: 169 / 257

Symbols

Meaning

Radio reception.

Remote control battery indica‐
tor.

Parked-car ventilation/heating
fault.

Tank contents too low.

Vehicle battery charging state
too low.

No radio reception.

Switching on

Press button briefly until the display
lights up.

The last menu opened is displayed.

Switching off

Press for approx. 2 seconds until the dis‐
play is switched off.

If no entry is made for 10 seconds, the display
shuts off automatically.

Select menu

The following menus can be selected via the
remote control.

▷

Parked-car ventilation/heating

▷

Timer 1

▷

Timer 2

Press the button repeatedly until the de‐
sired menu is displayed.

Activating/deactivating the functions

Several menu items are preceded by a check‐
box. It indicates whether the function is acti‐
vated or deactivated. Selecting the menu item
activates or deactivates the function.

The function is activated.

The function is deactivated.

Parked-car ventilation/heating

Activating

Select menu.

Press button to activate parked-car

ventilation/heating.

Deactivating

Select menu.

Press button to deactivate parked-

car ventilation/heating.

Timer

Two timers can be set with different times.
Only one timer can ever be activated.

Activating

Select Timer 1 or Timer 2.

Press the button to set the

hour.

Press the button.

Press the button to set the mi‐

nute.

Press the button twice to activate the

timer.

Deactivating

Select desired timer.

Press the button to deactivate the

timer.

Remote control range

The reception-dependent average range is ap‐
prox. 490 ft/150 m.

Seite 169

Climate control

Controls

169

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands

BMW X5 2013, Owner'S Manual

Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands