28-6-2011 9 033000=13069F
Place the console on a flat surface
If you choose not to mount the console, you can attach the rubber feet-caps (included) to
the back of the console. These feet-caps make sure the console will not move around when
using the console.
2.3 The menus
After connecting the console, the display will read
HOME CONTROL
. The time will be
displayed on the bottom line (for setting the time, see 5.1).
If you do not see the words
HOME CONTROL
but
TAMPER
, you need to close the top
compartment on the console. After closing the compartment, enter your PIN code (factory
settings 0000, see 8.3) to remove the word
TAMPER
. The display now shows
DISARMED
and
you will hear a double tone to confirm. Then the text
HOME CONTROL
will be shown.
2.3.1 Choosing your language
All menu items are displayed in English for default. You can choose any of the other
available languages as follows:
•
To access the menu, press the menu UP or menu DOWN button. The display now shows
ENTER PIN
.
•
Enter the 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). The
display is cleared and shows a * for each number entered. When the PIN code has been
entered correctly, the first menu item will show up on the display.
•
Use the menu buttons UP/DOWN to go to menu item
7. Options
. Press OK to select this
menu item. You can also go to this menu item directly by pressing a 7 on the number pad.
•
Use the menu buttons UP/DOWN to go to submenu item
Languages
. Press OK to select
this submenu item.
•
Use the menu buttons UP/DOWN to select your language. Press OK to select and
confirm.
•
Press Clear and afterwards 1 (=Yes) to quit the menu.
2.3.2 The menu in English
The menu items in the English language menu are:
1. INSTALL
Registering and de-registering sensors, remote controls and thermostats.
2. SET CLOCK
Setting the clock (5.1).
3. PHONE NUMS
Setting the phone numbers (5.2).
Sub-menu: PHONE
1
PHONE 2
PHONE 3
PHONE 4
