28-6-2011 26 033000=13069F
1. To access the menu, press the menu UP or menu DOWN button. The display now shows
ENTER PIN
.
2. Enter your 4-digit PIN code (factory setting 0000). For every digit entered, a * will appear.
3. When the PIN code has been entered correctly, the word
INSTALL
will show up on the
display.
4. Use the menu buttons UP/DOWN to go to menu item
5. NEW PIN
. Press OK to select this
menu item. You can also go to this menu item directly by pressing a 5 on the number pad.
5. Enter your new PIN code (4 digits). The new PIN can be seen on the display. Check if you
entered the correct PIN code and press OK.
6. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you
choose Yes, you will quit the menu. If you choose No, you go back to the first menu item.
9. Advanced security functions
9.1 Disarming the siren for silent alarm
You can set the security system to raise the alarm without sounding the siren (just the
telephone dialler and lighting). In case of a burglary, the built-in siren will not be activated
(Note: other sirens installed will still work). The siren is turned on in the factory settings.
1. To access the menu, press the menu UP or menu DOWN button. The display now shows
ENTER PIN
.
2. Enter your 4-digit PIN code (factory setting 0000). For every digit entered, a * will appear.
3. When the PIN code has been entered correctly, the word
INSTALL
will show up on the
display.
4. Use the menu buttons UP/DOWN to go to menu item
7. OPTIONS
. Press OK to select this
menu item. You can also go to this menu item directly by pressing a 7 on the number pad.
5. Use the menu buttons UP/DOWN to go to menu item
SIREN.
Press OK to select this menu
item.
6. Choose 1 for
SIREN ON
or 2 for
SIREN OFF
.
7. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you
choose Yes, you will quit the menu. If you choose No, you go back to the first menu item.
9.2 Activating the chime
9.2.1 Built in Chime
The console can, when in DISARMED mode, sound a chime –ding-dong– when a door armed
with a Door/Window Sensor is opened. This ensures that you will always hear if someone is
entering your house or small children open a door. This function is activated in the factory
settings.
1. To access the menu, press the menu UP or menu DOWN button. The display now shows
ENTER PIN
.
2. Enter your 4-digit PIN code (factory setting 0000). For every digit entered, a * will appear.
3. When the PIN code has been entered correctly, the word
INSTALL
will show up on the
display.
4. Use the menu buttons UP/DOWN to go to menu item
7. OPTIONS
. Press OK to select this
menu item. You can also go to this menu item directly by pressing a 7 on the number pad.
5. Use the menu buttons UP/DOWN to go to menu item
CHIME
. Press OK to select this menu
item.
6. Choose 1 for
CHIME ON
or 2 for
CHIME OFF
.
7. Press CLEAR again to quit the menu. To confirm your choice, press 1 for Yes or 2 for No. If you
choose Yes, you will quit the menu. If you choose No, you go back to the first menu item.
8. If you see a note
♫
on the display, the chime is activated.
The chime function also works for the wired inputs on zones 31 and 32.
