28-6-2011 32 033000=13069F
ANSWER ON:
Call-in activated. The time delay before the console answers the phone can be
set in the menu
DELAYS/ANSWER DELAY
(see 8.1). The standard delay is 30 seconds. If you use
an answer phone or voice mail, we advise you to use option 3:
VOICE MAIL
.
ANSWER OFF:
the call-in function is deactivated (standard setting).
VOICE MAIL:
Call-in activated. Choose this option when you use the standard voicemail
system offered by your telecom supplier. To access the console, ring your home number
twice. Let the phone ring for 10 seconds the first time. Hang up the phone and ring the
number again after 10 seconds, but within 30 seconds. The console will answer the phone.
Setting the call-in function:
1. To access the menu, press the menu UP or menu DOWN button. The display now shows
ENTER PIN.
2. Enter your 4-digit PIN code (factory setting 0000. See 8.3 for changing the PIN code). The
display is cleared and shows a * for each number entered.
3. When the PIN code has been entered correctly, the word
INSTALL
will show up on the
display.
4. Use the menu buttons UP/DOWN to go to menu item
7. OPTIONS
. Press OK to select this
menu item. You can also go to this menu item directly by pressing a 7 on the number pad.
5. Use the menu buttons UP/DOWN to go to menu item
ANSWER TYPE
. Press OK to select
this menu item.
6. You can now select
ANSWER ON, ANSWER OFF
or
VOICE MAIL
.
7. Use the menu buttons UP/DOWN to go to the desired menu item and press OK.
8. Press CLEAR again to quit the menu.
11.3 Operating the alarm functions via an outside phone
1. Call your home number. The console will answer.
2. You will hear ‘
Please enter PIN’
. Enter your 4-digit PIN code.
3. If your PIN is correct, you will hear
‘PIN accepted’
. If your PIN is incorrect, you will hear
‘Error’
.
4. Press
0
followed by
*
to activate your security system. You will hear ‘
Armed Away
’
5. Press
0
followed by
#
to deactivate your security system. You will hear ‘
Disarmed
’
6. When you press
9 9
followed by
*
, the console will do a status check, where status can be:
‘ARMED HOME’:
The system is set to ARM HOME mode.
‘ARMED AWAY’:
The system is set to ARM AWAY mode.
‘DISARMED’:
The system is switched off.
‘EMERGENCY ALARM’:
The alarm has been triggered by a PANIC BUTTON on a
remote control or an Additional (Wireless) Sensor.
‘ALARM IN ZONE 3’:
(example with zone 3). The alarm has been triggered by the
sensor in zone 3 (wireless sensor or emergency sensor).
11.4 Operate lights and equipment via an outside phone
1. Call your home number. The console will answer.
2. You will hear
‘Please enter PIN’
. Enter your PIN code.
3. If your PIN is correct, you will hear
‘PIN accepted’
. If your PIN is incorrect, you will hear
‘Error’
.
4. Press
4 *
: The X10 module with Unit Code 4 will be switched on. You will hear ‘
4 ON’
to
confirm.
5. Press
4 #
: The X10 module with UC 4 will be switched off. You will hear
‘4 OFF’
to confirm.
11.5 Changing Temperature Setting via an outside phone
1. Call your home number. The console will answer.
2. You will hear
‘Please enter PIN’
. Enter your PIN code.
3. If your PIN is correct, you will hear
‘PIN accepted’
. If your PIN is incorrect, you will hear
‘Error’
.
