BlueTree BT-2000, Product Manual

Page: 60 / 74

Appendix B: Reference Information
60 BlueTree Wireless BT-2010 Product Manual V1.5
AT Commands
The list of AT commands below can be used with the modem. For
syntax, input variables and expected results for the custom RIM
commands, please see “Key RIM AT commands” on page 39.
Command Description
A Answer a call
D Mobile-initiated call to dialable number
E Set echo mode
H Disconnect existing connection
I Display product identification information
O Switch from command mode to data mode
Q Set result code presentation mode
SO Set number of rings before auto answering the incoming call
S3 Set termination character for a command prompt
S4 Set response formatting character
S5 Set editing character for a command prompt
S6 Set pause before blind dialing
S7 Set number of seconds to wait for connection to complete
S8 Set number of seconds to wait when there is a comma dial modifier
S10 Set disconnection delay after indicating the absence of data carrier
S12 Set the escape code guard time
S13 Set the disconnection delay after a call has been terminated
V Set result code format mode
X Set CONNECT result code format and call monitoring
Z Set all current parameters to a user defined profile
&C Set circuit Data Carrier Detect DCD function mode
&D Set circuit Data Terminal Ready DTR function mode
&F Set all current parameters to manufacturer defaults
&V Display current configuration
&W Store current parameter to user defined profile
+GCAP Request complete terminal adapter capabilities list
+GMI Request Manufacturer ID
+GMM Request TA Model ID
+GMR Request TA Revision ID
+GSN Request TS Serial Number ID
+ICF Set TE-TA Control Character Framing