BlueTree BT-2000, Product Manual

Page: 34 / 74

Chapter 4: Using the GPS Features
34 BlueTree Wireless BT-2010 Product Manual V1.5
Using BlueVue
Configuring the default
TSIP data settings
Several BlueVue settings need to be configured to enable the GPS
Location features.
To configure the default TSIP settings:
1.
Single-click the BlueTree icon located on your system’s task bar,
and then click Settings .
2.
On the BlueTree Modem Properties box click the GPS Settings tab.
3.
In GPS Status, you can manually suspend the GPS manager even
after it has been installed and running.
4.
In the COM Port list, select the COM port on the PC that will be
attached to the GPS port (AUX) on the modem.
5.
In the Units of Measurement list, select the appropriate units in
which to display the GPS data. The table below describes the options:
6.
The GPS manager can be selected to start automatically or
manually when BlueVue starts. Click the GPS requires manual start
check-box if you do not want the BlueVue to process the GPS data
stream on the COM port only until to start it manually.
7.
Click OK .
BlueVue is now configured to display the GPS data in the main BlueVue
window.
List item Measures speed in Measures elevation in
Imperial mph, Miles per hour Feet
Metric km/h, Kilometers per hour Meters
Nautical kts, knots Feet