BlueTree BT-2000 Product Manual Download

Page: 40 / 74

Chapter 5: Troubleshooting

BlueTree Wireless BT-2010 Product Manual

V1.5

BlueVue Help

GPS signal strength seems low.

The length of the cable may be affecting
the signal strength.

Choose the appropriate cable for your
installation.

No GPS signal

GPS antenna is disconnected from the
modem.

Check that the antenna cable is
connected properly to the SMA
connector labeled AUX on the modem.

Issue

Possible cause

Suggestion

The Network Status Display shows a
blank screen.

Modem is powered off.

Check modem's power cable.

Modem's serial cable is disconnected
from PC.

Check that the serial cable is connected
to the proper COM port on your
computer and the other end connected
to MAIN.

Service is stopped.

Go to BlueTree Modem Properties and
select Service Control. Then click the
Start button.

The Network Status Display doesn't
show the name of a service provider.

No service is available.

Check with your service provider.

You are outside the network coverage
area.

Check your service provider's coverage
map to verify if you have service in your
immediate area.

Your antenna is not installed correctly.

Verify that your antenna cable is
connected to the modem.

Your signal is lost (you are in a tunnel or
behind a building preventing the modem
from receiving a signal)

Change your location.

Your account has not been activated by
your service provider.

Check with your service provider.

Another application cannot access the
COM port used by the modem.

BlueVue service is running and is
currently using the COM port.

Open BlueVue and select the Tools
menu. Click on Pause to pause the
Agent and release the COM port.

Cannot establish a data connection.

Your user profile has incorrect entries.

Go to the Connection Manager and open
the profile. Ensure that you have the
correct entries as supplied by your
service provider.

You are outside the network coverage
area.

Change your location to regain a
received signal.

Your account is not activated.

Contact your service provider.

Your signal is lost (you are in a tunnel or
behind a building preventing the modem
from receiving a signal).

Change your location to regain a
received signal

BlueVue service is stopped

Go to BlueTree Modem Properties page,
select the Service Control tab and click
the Start button.

Summary of Contents for BT-2000











































































Search results

Summary of Contents for BT-2000

Reviews:

Related manuals for BT-2000

Brands by name

Popular brands

BlueTree BT-2000, Product Manual

Search results

Summary of Contents for BT-2000

Reviews:

Related manuals for BT-2000

Brands by name

Popular brands