63
CHAPTER 5: AT Commands, S-Registers, and Result Codes
11
CONNECT 4800*
Connected at 4800 bps
12
CONNECT 9600*
Connected at 9600 bps
13
CONNECT 14400*
Connected at 14,400 bps
14
CONNECT 19200*
Connected at 19,200 bps
24
CONNECT 7200*
Connected at 7200 bps
25
CONNECT 12000*
Connected at 12,000 bps
26
CONNECT 16800*
Connected at 16,800 bps
40
CONNECT 300*
Connected at 300 bps
55
CONNECT 21600*
Connected at 21,600 bps
56
CONNECT 24000*
Connected at 24,000 bps
57
CONNECT 26400*
Connected at 26,400 bps
58
CONNECT 28800*
Connected at 28,800 bps
59
CONNECT 31200*
Connected at 31,200 bps
60
CONNECT 33600*
Connected at 33,600 bps
70
CONNECT 32000*
Connected at 32,000 bps, 56K rate
71
CONNECT 34000*
Connected at 34,000 bps, 56K rate
72
CONNECT 36000*
Connected at 36,000 bps, 56K rate
73
CONNECT 38000*
Connected at 38,000 bps, 56K rate
74
CONNECT 40000*
Connected at 40,000 bps, 56K rate
75
CONNECT 42000*
Connected at 42,000 bps, 56K rate
76
CONNECT 44000*
Connected at 44,000 bps, 56K rate
77
CONNECT 46000*
Connected at 46,000 bps, 56K rate
78
CONNECT 48000*
Connected at 48,000 bps, 56K rate
79
CONNECT 50000*
Connected at 50,000 bps, 56K rate
80
CONNECT 52000*
Connected at 52,000 bps, 56K rate
81
CONNECT 54000*
Connected at 54,000 bps, 56K rate
82
CONNECT 56000*
Connected at 56,000 bps, 56K rate
88
DELAYED
Delay is in effect for dialed number
* When the extended result code configuration option is enabled, one of the following
codes is appended to the result code, depending on the type of error control connection:
V42bis — V.42 error control (LAP-M) and V.42 bis data compression;
V42 — V.42 error control (LAP-M) only;
MNP5 — MNP
®
4 error control and MNP 5 data compression;
MNP4 — MNP 4 error control only;
NoEC — No error control protocol.
