57
CHAPTER 5: AT Commands, S-Registers, and Result Codes
Defaults:
None
Description:
Sets the callback security password for the y memory
location. The password must have 6 to 10 characters,
and cannot include the + or - characters.
Command:
#CBPn
Callback Parity
Values:
n = 0, 1, or 2
Default:
0
Description:
Sets parity for the callback security messages.
#CBP0
No parity.
#CBP1
Odd parity.
#CBP2
Even parity.
Command:
#CBRy
Callback Security Reset
Values:
y = 0–29
Default:
None
Description:
Clears the password and phone number in the y
memory location.
Command:
#CBSn
Callback Enable/Disable
Values:
n = 0, 1, 2, or 3
Default:
0
Description:
#CBS0
Disables callback security.
#CBS1
Enables local and remote callback security.
#CBS2
Enables remote callback security only.
#CBS3
Disables callback security until local hangup or reset.
Command:
#Pn
Set 11-bit Parity
Values:
n = 0 or 1
Default:
2
Description:
#P0
No parity.
#P1
Odd parity.
#P2
Even parity.
Command:
#Sx
Enter Setup Password
Values:
x = password (1–8 characters, case-sensitive)
Default:
MTSMODEM
Description:
Enters the callback security setup password.
Command:
#S=x
Store Setup Password
Values:
x = password (1–8 characters, case-sensitive)
Default:
MTSMODEM
