58
MINI-MODEM V.92
Description:
Stores a new callback security and remote
configuration setup password.
Command:
+++AT<CR> Escape Sequence
Values:
n/a
Description:
Puts the modem in command mode (and optionally
issues a command) while remaining on-line. Type
+++AT
and up to 10 command characters, then
press ENTER. Used mostly to issue the hang-up
command: +++ATH<CR>.
Command:
%%%AT<CR>
Remote Configuration Escape Sequence
Values:
n/a
Description:
Initiates remote configuration mode while on-line
with remote modem. The remote configuration
escape character (%) is defined in register S13.
5.2 S-Registers
Certain modem values, or parameters, are stored in memory locations called S-
registers. Use the S command to read or to alter the contents of S-registers (see
Section 5.1
).
Register Unit Range
Default Description
S0
1 ring
0–255
1
Sets the number of rings until the
modem answers. ATS0=0 disables
autoanswer completely. Range varies by
country. Set S0=2 for Caller ID.
S1
1 ring
0–255
0
Counts the rings that have occurred.
S2
decimal 0–255
43 (+)
Sets ASCII code for the escape sequence
character. Values greater than 127 disable
escape.
S3
decimal 0–127
13 (^M) Sets the ASCII code for the carriage
return character.
S4
decimal 0–127
10 (^J)
Sets the ASCII code for the line feed
character.
S5
decimal 0–127
8 (^H)
Sets the ASCII code for the backspace
character. Values over 32 disable
backspace.
