36
MINI-MODEM V.92
Command:
Qn
Result Codes Enable/Disable
Values:
n = 0 or 1
Default: 0
Description:
Q0
Enables result codes.
Q1
Disables result codes.
Q2
Returns an OK for backward compatibility with some
software.
Command:
Sr= n
Set Register Value
Values:
r = S-register number; n varies
Default: None
Description:
Sets the value of register Sr to the value of n, where n
is entered in decimal format. Example: S0=1.
Command:
Sr?
Read Register Value
Values:
r = S-register number
Default:
None
Description:
Reads the value of register Sr and displays it in 3-digit
decimal form. For example, S2? gives the response
043.
Command:
T
Tone Dialing
Values: P,
T
Default: T
Description:
Configures the modem for DTMF (touchtone)
dialing. Dialed digits are tone dialed until a P
command or dial modifier is received.
Command:
Vn
Result Code Format
Values:
n = 0 or 1
Default: 1
Description:
V0
Displays result codes as digits (terse response).
V1
Displays result codes as words (verbose response).
Command:
Wn
Result Code Options
Values:
n = 0, 1, or 2
Default: 2
Description: W0
CONNECT result code reports serial port speed,
disables protocol result codes.
W1
CONNECT result code reports serial port speed,
enables protocol result codes.
W2
CONNECT result code reports line speed, enables
protocol result codes.
