42
MINI-MODEM V.92
\N4
V.42 reliable mode. If the modem cannot make a
V.42 connection, it disconnects.
\N5
V.42, MNP, or non-error correction (same as \N3).
\N7
V.42, MNP, or non-error correction (same as \N3).
Command:
\Qn
Flow Control Selection
Values:
n = 0, 1, or 3
Default:
3
Description:
\Q0
Disables flow control (same as &K0).
\Q1
XON/XOFF software flow control (same as &K4).
\Q2
CTS-only flow control. Not supported.
\Q3
RTS/CTS hardware flow control (same as &K3).
Command:
\Tn
Inactivity Timer
Values:
n = 0, 1–255
Default:
0
Description:
\Tn
Sets the time (in minutes) that the modem waits
after the last character is sent or received before it
disconnects. A value of zero disables the timer.
Applies only in buffer mode.
You can also set the inactivity timer by changing
the value of S30.
Command:
\Vn
Protocol Result Code
Values:
n = 0, 1, or 2
Default:
1
Description:
\V0
Disables the appending of the protocol result code
to the DCE speed.
\V1
Enables the appending of the protocol result code to
the DCE speed.
\V2
Same as \V1.
Command:
\Xn
XON/XOFF Pass-Through
Values:
n = 0 or 1
Defaults:
0
Description:
\X0
Modem responds to and discards XON/XOFF
characters.
\X1
Modem responds to and passes XON/XOFF
characters.
Command:
-Cn
Data Calling Tone
Values:
n = 0 or 1
Defaults:
0
