20
MINI-MODEM V.92
3. Insert the Mini-Modem V.92 compact disc into your CD-ROM drive, and then
click Have Disk. (If the disc menu appears, you may either close it or ignore it
for now.)
4. In the Install from Disk dialog box, select the drive the CD is in, and then
click OK.
5. A list of modems appears. Select your modem from the list, and then click
Next
.
6. Select the port the modem is connected to, and then click Next.
7. Windows installs the driver and MTMoh program.
8. Click Finish to exit.
3.5.2 R
EMOVING AN
O
LD
M
ODEM
D
RIVER
When a new modem replaces another modem, the old modem driver remains
in Windows, and the old modem driver is still selected in HyperTerminal and
other Windows applications. Though you can change the application connection
descriptions one at a time, it is easier to force Windows applications to use the new
modem by removing the old modem driver from Windows.
1. Click the Start button, point to Settings, and click Control Panel.
2. Double-click the Modems icon to open the Modems Properties dialog box.
3. In the list box, select the old modem.
4. Click Remove, and then click Close.
5. The next time you dial a HyperTerminal connection, it will select your new
modem and ask you to confirm the selection.
3.6 Step 5: Configure the Mini-Modem V.92 for Your Country
Before you use your modem, you must configure it for the country in which it will
be used. You must also do this if you move the modem to another country after it
has been configured for the first country. You can use one of two configuration
methods: The Global Wizard Utility or AT commands.
