13
BINKS EMS | OPERATION MANUAL
5.5
Fluid Panel
ITEM
DESCRIPTION
1
Color Stack.
Included only if ordered with a
multicolor system. Flushing air, solvent, and the
resin inlet ports for each color are located here.
Shown is a 5 color system.
2
Poppet Valve.
A pneumatically controlled valve
that opens and closes fluid passageways when
provided a signal from the corresponding trigger
line.
3
Flow Meter.
The resin flow measuring device
used to calculate and control the rate of
movement of the Dispense Pump.
4
Fluid Back Panel.
The mounting plate used
to secure the components to the wall or stand
mount.
ITEM
DESCRIPTION
5
Air Flow Switches.
Senses the atomizing air
when the spray gun is triggered. One Air Flow
Switch is used for each spray gun.
6
Mix Manifold.
The location of Resin and
Hardener mixing. Combines the two materials and
sends the resulting mixture out to the spray gun.
Shown is the Programmable Flush Mix Manifold
for multicolor systems. Flush valves are located
here on single color systems.
7
Air Cut Off Valve.
Used on the Air Flow Switch
when equipped with a Gun Box. Valve is opened
when signal is received from Gun Box.
7
6
1
2
3
4
5
