27
BINKS EMS | OPERATION MANUAL
8.12 Set Ratio Screen
This screen sets the resin to hardener ratio for each color loaded into the system. Ratios are programmed as the part of resin
relative to one part hardener or catalyst.
For example a 5:2 ratio material could be represented as 2.5:1, and the number 2.5 is then entered in the appropriate field on
the screen below.
1. Colors 1 through 6
Enter the resin ratio for
each color relative to one part hardener or
catalyst.
2. NEXT
Pressing F4 (NEXT) will advance to the next
screen.
2
1
NOTE
Colors will only be accessible if the system is configured for multicolor.
To adjust values, press the up / down arrow until the desired field is
highlighted. Use the number pad on the pendant to enter the desired value.
After the value is displayed, press the enter key to accept the new value.
When changing paint resins and / or loading a new material into the
system always perform a
Flow Meter Calibration – Resin + Hardener
,
especially when starting up the unit for the first time.
If changing the ratio of a loaded color, the materials must be reloaded for the
changes to take effect.
