Binder vdl 115 Operating Manual Download Page 60

Page: 60 / 207

VDL (E3.1) 06/2020

Page 60/206

DANGER

Risk of suffocation due to high concentration of inert gas.

Death by suffocation.

∅

Do NOT set up chambers in non-ventilated recesses.



Ensure active technical ventilation measures.



Respect the relevant regulations for handling inert gas.



When decommissioning the vacuum drying oven, shut off the inert gas supply: Close

valve (6).

6.4

Pump module (option)

The mounting instructions Art. no. 7001-0137 supplied with the pump moduledescribe
how to mount the vacuum drying oven onto the pump module and installing the suction
line into the pump module.

Figure 13: VDL mounted on pump module

(example size 115)

Figure 14: Pump module, rear view

(example size 115)

(11) Connection to extraction

(13) Fixation screw fitting for grounding

(13)

(11)

Summary of Contents for vdl 115
















































































































































































































Search results

Summary of Contents for vdl 115

Reviews:

Brands by name

Popular brands

Binder vdl 115, Operating Manual

Search results

Summary of Contents for vdl 115

Reviews:

Brands by name

Popular brands