Binder vdl 115, Operating Manual

Page: 46 / 207

VDL (E3.1) 06/2020 Page 46/206
(1) Power cable
(2) Connection cable to Ethernet interface for computer communication
(3) 2 connection sockets (3a) and (3b):
(3a) Connection „Object temperature input“ (option) for optional object temperature display
(3b) Connection „Analog output“ (option) for optional analog outputs for temperature and pres-
sure
(4) Universal connection for inert gas / ambient air “GAS/AIR”, adapter with hose olive
∅
8 mm /
0.31
in
(5) Additional universal connection for inert gas / ambient air “GAS/AIR 2” (option), adapter with hose
olive
∅
8 mm /
0.31 in
(6) Vacuum connection with small flange DN16
(7) Plug „Manual ventilation“ for emergency ventilation in case of power failure
(8) Heatsink
(9) Pressure regulator for sweeping / overpressure
(10) Compressed air connection for sweeping / overpressure
3.5 Area classification, information for the zone classification
The operator is to classify the zones. The following areas are identified below:
•
Unprotected areas. The spread of an explosive atmosphere to unprotected device parts must be relia-
bly prevented.
•
Areas where, depending on the substances used, explosive atmospheres may occur on a rare and
temporary basis. The creation of a zone outside the defined areas must be reliably prevented.