BH FITNESS Inertia G688, Instructions For Assembly And Use

Page: 13 / 42

13
English
GENERAL INSTRUCTIONS.-
Carefully read through the instructions contained in this
manual. It provides you with important information about
safety, use and maintenance of the treadmill.
You should always observe certain safety precautions
when using this unit, including the following:
1
This unit has been designed for professional use.
2
Your unit can only be used by one person at a time. It
can only be used by people who weigh 195kg or less.
3
Place your unit on a flat surface, with at least 2 metres
of free space at the rear and 1 m around. Do not place
your unit on any surface that might block a ventilation
opening. Place a protective sheet below your unit to
protect the floor or carpet from possible damage.
4
Your unit is equipped with a safety key. The safety key
must be inserted into its housing, otherwise the machine
will not operate. When you are using the machine always
clip the cord on the safety key to your clothing.
Remove the safety key whenever the machine is not being
used and keep it safe from children and others.
5
Make sure that the treadmill unit operates correctly
before attempting to use it. Never use an appliance that
might be faulty.
6
The owner is responsible for ensuring that anyone who
uses the machine is duly informed about all of the
necessary precautions.
7
Parents and/or those responsible for children must
always be aware of their curious nature and how this can
often lead to hazardous situations and behaviour which
could cause accidents. This is why they should always be
supervised. Under no circumstances should this appliance
be used as a toy.
8
Do not allow children or the disabled to use the
appliance without the strict supervision of a qualified
person.
9
In the event of any emergency, place your feet on the
side rails and hold onto the handrail until the unit stops.
10
Use the handrail to help you get on and off the
treadmill and when changing the speed. Do not jump onto
the belt while it is moving.
11
Keep your hands well away from any of the moving
parts. Do not place your hands, feet or any other object
below the treadmill belt.
12
Do not stand still on the belt while it is moving.
13
Use suitable clothing and footwear. Make sure that all
laces/cords are tied correctly. To avoid injury and
unnecessary wear on the belt, make sure that your
footwear is not dirty.
14
Do not use the machine outdoors.
15
It is not advisable to keep your unit in a damp place for
long periods as it will be prone to rust.
16
Make sure not to overlubricate the unit as this might
stain the floor or carpeting where the unit stands.
17
Never use accessories not recommended by the
manufacturer.
SAFETY INSTRUCTIONS.-
This product must have an earth connection. In the event
that the appliance malfunctions then the earth connection
will redirect the electrical current away from the machine
and reduce the risk of an electrical shock.
This product is supplied with a mains cable that has an
earth wire and a plug with an earth pin.
DANGER! If the equipment is not earthed correctly then
there is a risk of electrical shock. If in doubt, get an
electrician or technical specialist to check that the earth
connection is correct. Do not modify the plug supplied with
the equipment, if it does not fit the wall socket then get an
electrician to install an electrical socket that does.
This product must only be used on a 220-240 volt circuit,
with an earthed socket similar to that shown in Fig. A.
Make sure that the appliance is only connected to a wall
socket with the same pin layout as the plug. Do not use an
adaptor with this appliance.
Always observe the following recommendations when
using electrical appliances:
1 Make sure that the mains supply voltage matches that of
the machine before plugging it in. The supply voltage must
be the same as that stated on the characteristics plate and
the holes in wall socket must match the pins for plug on
the machine.
2 To reduce the risk of electrical shock, first put the switch
to the “0” position and then unplug it from the wall socket.
Always unplug the unit immediately after use and before
proceeding to clean it.
3 Make sure that the treadmill is switched off and
unplugged before beginning any type of maintenance or
assembly work on it.
4 Do not unplug the treadmill by tugging on the mains
cable.
5 Do not use the machine if the mains cable becomes
damaged or worn.
6 Keep the mains cable away from hot surfaces.
SAFETY BREAKER.-
This model is equipped with an electronic circuit breaker
to protect both the electronic and electrical circuits.
This safety device will be automatically triggered if the unit
is subjected to abnormal force or heat.
Should this occur:
1.- Set switch (L), located on the casing, to the “0” (OFF)
position Fig.B.
2.- Press the circuit button (C) to reset the unit.
3.- Next, set switch (L) to the “I” (ON) position and the unit
will be ready for use again.