BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 63502
Digital Battery Load Tester
Specifications
Display: LED 0-16 VDC (max.)
Load current: 125 Ampere
Battery voltage: 12 Volt
Battery CCA: 200 - 1000 CCA
Test cycle: 5 sec. per test with 1 min. cool down
up to 3 tests in 5 min.
Test cable length: 480 mm
Dimensions: 290 x 170 x 90 mm
Weight: approx. 1.2 Kg
EMC Council Directive 2014/30/EU
RoHS Directive 2015/863 Annex II 2017/2102
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating
and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the
invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place
for future reference.
Safety Warnings and Precautions
Warning
: When using product, basic safety precautions should always be followed to reduce the risk
of personal injury and damage to equipment. Read all instructions before using this product !
•
Keep work area clean. Cluttered areas invite injuries.
•
Observe work area conditions. Do not use the Battery Tester in damp or wet locations. Don’t
expose to rain. Keep work area well lighted. Do not use electrically powered tools in the
presence of flammable gases or liquids.
•
Keep children away. Children must never be allowed in the work area. Do not let them handle
the Battery Tester.
•
Store idle equipment. When not in use, products must be stored in a dry location to inhibit rust.
Always lock up products and keep out of reach of children.
•
Use the right product for the job. Do not attempt to force a small Battery Tester to do the work
of a larger industrial Battery Tester. There are certain applications for which this Battery Tester
was designed. It will do the job better and more safely at the rate for which it was intended. Do
not modify this Battery Tester and do not use this Battery Tester for a purpose for which it was
not intended.
•
Dress properly. Do not wear loose clothing or jewelry as they can be caught in the Battery
Tester. Protective, electrically non-conductive clothes and non-skid footwear are recommended
when working. Wear restrictive hair covering to contain long hair.
•
Use eye and ear protection. Always wear ANSI approved impact safety goggles.
•
Wear a full face shield when working with battery acid. Wear an ANSI approved dust mask or
respirator when working around metal, wood, and chemical dusts and mists.
•
Do not overreach. Keep proper footing and balance at all times. Do not reach over or across
running machines.
•
Maintain tools with care. Keep the Battery Tester clean for better and safer performance. Follow
instructions for changing accessories. Inspect product cords periodically, and if damaged, have
them repaired by an authorized technician. The handles must be kept clean, dry, and free from
oil and grease at all times.
