Bernina Artista 730, Instruction Manual

Page: 240 / 285

236
Embroidery - Alphabets, Lettering
Creating Arched Lettering
™
touch symbol and a special screen appears
™
select desired arched lettering style:
•
lettering below the curved baseline
(lettering counter clockwise)
•
lettering above the curved baseline
(lettering clockwise)
•
three forms each of arched lettering are
possible (the larger the green circle the less the
arch)
™
confirm with «OK»
•
the special screen closes and the lettering is
displayed, formed in the selected arch
Lettering With Vertical or Horizontal Baseline
™
touch symbol and a special screen appears
™
select vertical or horizontal baseline
™
confirm with «OK»
•
the special screen closes and the lettering is
displayed, formed in the selected baseline
Moving Letters
•
after altering the baseline it is possible that the
programmed text is no longer in the center of
the hoop
™
touch symbol twice to move text to the center
of the hoop
Altering Lettering Size With Direct Input
™
touch the Letter Manipulation button
™
height can be changed in mm steps for selected
lettering by using arrows at right end of Height
box
•
up arrow increases lettering size
•
down arrow decreases lettering size
Changing Letter Spacing
™
use up or down arrows to change spaces in mm
steps between letters
Changing Fonts
™
touch the Letter Manipulation button
™
new font can be selected for entered text
™
use up or down arrows at right end of Font bar
to change font style
032131.70.04_0509_a730_EN