Bernina Artista 730, Instruction Manual

Page: 113 / 285

111
Buttonholes – Summary
In General
•
for more information on Application see pages
116-133
••••••••••••••••••••••••••••••••
Buttonholes are practical closures which can also
be used for a decorative effect. The
artista 730
provides a very versatile selection.
All buttonholes can be sewn and programmed
in a variety of ways.
™
press Buttonhole button
•
a summary of the different buttonholes
and eyelets appears on the screen display
Buttonholes/Button Sew-on Program/Eyelets
Select Buttonhole/Buttonhole Sew-on
Program/Eyelet
™
touch desired stitch
•
the selected buttonhole, eyelet or button sew-on
program is activated
•
if one of the stitches (51-63) is activated, all
functions that can be used are on the function
toolbar
Buttonhole Program Functions
The functions below appear on the function toolbar at the lower edge of the screen display when any
buttonhole (51-59 + 63) is selected.
Programming Buttonhole Length
•
the symbol is automatically highlighted in
blue (active) when a buttonhole is selected
•
using the Quick Reverse button on head
frame a buttonhole length can be
determined directly
•
when the buttonhole is programmed the
symbol is turned off (inactive, yellow)
•
if a new length is to be programmed the
symbol has to be reselected
Buttonhole Length – Direct Entry Length
(in mm) or On-screen Button
Measurement
™
touch symbol to open special screen display
™
enter the buttonhole length (stitch length in
mm) directly with the stitch length or stitch
width knob
™
to measure hold button to bottom lower left
corner of screen
™
the buttonhole length is obtained by
adjusting blue circle to button size (with
stitch length or stitch width knob)
•
2mm for the button thickness will be added
automatically (with on-screen button
measurement only)
Application:
•
simple method to determine buttonhole size
by direct entry of the length in mm or by
measuring button on the screen
Manual Buttonhole
™
touch symbol to open special screen
display
™
sew manual buttonhole in 4 or 6
steps (according to buttonhole type)
Application:
•
for individual manually sewn
buttonholes
•
to repair existing buttonholes
Stitch Counter Buttonhole
™
select buttonhole
™
touch symbol
•
the stitch counter buttonhole is
activated
™
when the desired length is reached
(first buttonhole bead), press the
external Quick Reverse button
•
after length of second bead is
determined by pressing the Quick
Reverse button, the screen display
changes to «auto Stitch Counter»
•
the selected buttonhole is
programmed
032131.70.04_0509_a730_EN