Bernina Artista 730, Instruction Manual

Page: 191 / 285

189
Sewing and Sewing Computer Support – Messages
Messages Notes
•
The authentication for the provider failed. Check the settings in the Setup Program
Please check the username and the password. and try again.
•
The communication with the provider was interrupted. Connecting problems occurred. Try to enter
Please try later or use another provider.
another provider if possible, or try again.
•
An unknown error occurred with the Modem. Remove modem, then reconnect.
Please try again.
•
You cannot save or delete files on The «myartista» portal provides tips and news.
the myartista Portal.
•
A problem occurred in communicating Try to connect to the «myartista» portal again.
with the myartista Portal. Please try again. Remove and reconnect modem if necessary.
•
To keep your sewing/embroidery computer This notification will appear after approx.
performing at its best, it’s time to complete 180,000 stitches. After cleaning/oiling clear
the following tasks. Remove thread and lint from the display by touching «OK». The display can
beneath the stitch plate, as well as from the feed be cleared temporarily by touching «ESC»,
dog area. These instructions can be found but will appear again when restarting the
on page 185 of the manual. sewing computer. After clearing with «ESC»
for the third time, the cleaning notification will
only appear again after a further approx.
180,000 stitches.
•
It’s time for your regular service check. The sewing computer must be taken for a
Please contact your BERNINA dealer for service to a BERNINA dealer.
an appointment. The notification will appear after approx.
2,000,000 stitches. If the service was done
bythe BERNINA dealer, the stitch counter will
be on «0» again and the display does not
appear anymore. The display can be cleared
temporarily by touching «ESC», but will appe-
ar again when restarting the sewing computer.
After clearing with «ESC» for the third time,
the notification will appear again at approx.
4,000,000 stitches.
•
You have opted not to take your sewing/embroidery Flawless functioning of the sewing/embroidery
computer to your BERNINA dealer for its service computer can not be guaranteed if the
check. This message will not appear until servicing is not carried out at the recommen-
it’s time for the next regular service. ded regular intervals.
•
Please insert USB data stick that includes the Connect the USB data stick to sewing/
video-film tutorials and press «OK». embroidery computer that includes video-film
tutorials on various sewing techniques and
topics.
•
Main Motor failed. Please check hook system. Open the bobbin cover. Remove any thread
lint from the hook area/bobbin case.
032131.70.04_0509_a730_EN