Bernina Artista 730 Instruction Manual Download Page 230

Page: 230 / 285

226

Embroidery - Motifs

Positioning Motif

By moving or rotating the motif can
be moved to another position within
the hoop.

Preparation

select desired motif from the
Selection menu

•

the motif appears in the screen
Edit 1

use the «To Next Page» symbol to
change to the screen Edit 2

touch symbol

•

the Information Areas for operating the stitch width and
length knob appear

to move the motif horizontally turn the stitch width knob

turn stitch width knob to right to move motif to right

turn stitch width knob to left to move motif to left

•

in the Information Area the alteration is displayed in 1/10 mm

to move the motif vertically turn the stitch length knob

turn stitch length knob clockwise (down) to move motif
downwards

turn stitch length knob counter clockwise (up) to move
motif up

•

in the Information Area the alteration is displayed in 1/10 mm

to move the motif diagonally turn the stitch width and length
knob

•

the motif is moved diagonally when the same number appears
in both Information Areas

to move the motif back to the middle touch the Information
Areas or touch «Move Motif» again

•

If a stitch happens to fall outside the embroidery area, the outli-
ne of the hoop is displayed in red.

Positioning Motif in Desired Location

Note:
If the knobs are turned slowly the
motif can be moved step by step
(step length = 1/10mm).

Move Motif

Move motif as desired:

Rotate Motif

Rotate motif as desired:

touch symbol

•

the Information Area for operating the stitch width knob
appears

to rotate the motif clockwise turn stitch width knob clockwise

•

in the Information Area the position in shown in degrees (°)

to rotate the motif counter clockwise turn the stitch width
knob counter clockwise

•

in the Information Area the position in shown in degrees (°)

to reactivate the default setting (0°/360°) touch the purple
knob icon

touch «rotate motif» several times and the motif is rotated
clockwise in 90° steps (0°/90°/180°/270°/360°)

Note:
If the knobs are turned slowly the
motif can be moved in 1° steps.

032131.70.04_0509_a730_EN

Summary of Contents for Artista 730






























































































































































































































































































Search results

Summary of Contents for Artista 730

Reviews:

Related manuals for Artista 730

Brands by name

Popular brands

Bernina Artista 730, Instruction Manual

Search results

Summary of Contents for Artista 730

Reviews:

Related manuals for Artista 730

Brands by name

Popular brands