Bernina Artista 730, Instruction Manual

Page: 231 / 285

227
Embroidery - Motifs
Checking the Motif Position
With the functions «Check» and «Motif Center» the motif position can be
checked before embroidering.
Check
The function «Check» reads the attached hoop size and stitching area:
™
touch symbol
•
the hoop size is read causing the hoop to move
™
«Check» then confirms placement by moving hoop to reflect stitching area
of selected motif
™
«Check» moves hoop 4 steps so that stitching area of selected motif can
be confirmed
•
hoop moves to lower left corner
•
hoop moves to lower right corner
•
hoop moves to upper right corner
•
hoop moves to upper left corner
™
confirm each position by touching «OK»
•
if no hoop or a too small hoop was attached, an error message will appear
Checking Motif Center
™
touch symbol
•
the exact center of the motif is indicated on the display
•
the hoop will be moved until the needle is in the center of the motif
™
touch symbol again and on the display the first stitch of the motif will be
marked once more
Altering Motifs
Mirroring Motifs
Each motif can be mirrored left/right or up/down.
Preparation
™
select desired motif from the Selection menu
•
motif appears in the screen Edit 1
™
use the «To Next Page» symbol to change to the screen Edit 2
™
touch symbol «Horizontal Mirror Image (left/right)»
•
the motif will be mirrored horizontally
Mirroring Motifs Horizontally (left/right)
032131.70.04_0509_a730_EN