150
Quilt Stitches – Applications
Preparation
Securing Function (only Mode 2)
•
lower the feed dog
•
the presser foot pressure must be
reduced
•
use slide-on table
•
attach the desired presser foot sole
to the BSR presser foot
•
removing sole: press both buttons
(see arrows) on each side of the
foot
•
slide the sole down the groove at
an angle
•
attaching the sole: slide the sole up
in the groove until it clicks into
place
Needle Stop Down (Default)
•
the arrow points down on the
display = the sewing computer
stops with needle down, when
taking foot off foot control
Needle Stop Up
•
press "Needlestop up/down" func-
tion. The arrow points up = the
sewing/embroidery computer stops
with the needle up on releasing
the foot control
Raise or Lower the Needle
•
by pressing the heel on the foot
control, the needle can be lowered
or raised
Securing With the Quick Reverse
Button (only Mode 1)
•
unplug the foot control
•
place the fabric under the presser
foot, lower presser foot
•
hold upper and lower thread tight
and press Quick Reverse button to
start BSR mode
•
sew 5 to 6 securing stitches
•
stop the BSR mode by pressing the
Quick Reverse button
•
cut threads
•
re-start the BSR mode by pressing
the Quick Reverse button to conti-
nue the stitching process
Securing Function
(only Mode 2)
•
press the «Securing
Function» button
•
press the foot control or the Quick
Reverse button
•
short securing stitch sequence will
be sewn as soon as the fabric is
moved under the presser foot.
After the sequence is sewn the set
stitch length will be activated and
the securing function will be auto-
matically deactivated
Free Hand Quilting Without BSR
Activation
•
touch the BSR button (on the left
side on the display)
•
the BSR mode is deactivated, the
buttons «BSR1» and «BSR2» on
the left side on the display go off
•
normal free hand quilting
can
now be sewn with the BSR
foot, without automatic regu-
lar stitch length
•
attach the BSR presser foot to the
sewing computer and plug the
cable into the green socket until it
clicks into place
•
the «BSR» screen opens automati-
cally
•
the BSR mode 1 is activated (BSR1
is standard)
•
the basic stitch length setting is
2mm
•
set the desired stitch length
•
when sewing small forms and
stippling, stitch length of 1mm -
1.5mm is suggested
When exceeding a
certain speed, adhe-
ring to regular
stitch length cannot
be guaranteed.
Make sure that the
lens on the bottom
of the BSR foot is
not dirty (finger-
prints, etc.). Clean
lens periodically
with soft, slightly
damp cloth.
Using the following functions in the BSR mode:
032131.70.04_0509_a730_EN
Summary of Contents for Artista 730
