Bernina Artista 730, Instruction Manual

Page: 16 / 285

14
The Sewing Computer – Operating Instructions
Threading the Upper Thread
Attaching the Thread Spool
™
raise the needle and presser foot
™
turn the power switch to «0» (off)
™
attach the foam pad
™
place spool on pin (thread winds clockwise)
™
attach the appropriate spool disc - diameter of
spool determines disc size. There must be no
clearance between the disc and the spool
™
take thread through rear guide A
™
then into slit of upper thread tension
Down
™
pull thread down to the right of the take-up
cover to
B
Up
™
take thread up to the left of the cover to C in
the direction of the arrow, placing it in the take-
up lever
Down
™
take thread down and through guides D and E
Refer to the safety instructions!
!
Inserting the Bobbin
Clockwise Turning of
the Bobbin
•
the bobbin must turn
clockwise when the
thread is pulled
Inserting the Bobbin
™
insert the bobbin so
that the thread runs
clockwise
Pulling the Thread
Into the Slot
™
pull the thread
counter clockwise
into the slot
Pulling the Thread
Under the Spring
™
pull the thread to the
left under the spring
until it lies in the
T-shaped slit at the
end of the spring
A
C
D
E
B
032131.70.04_0509_a730_EN