Bernina Artista 730, Instruction Manual

Page: 208 / 285

204
The Embroidery Computer – Starting to Embroider
Selecting the Embroidery Hoop
Embroidering Motifs
Screen Edit 1
™
select an embroidery motif from the various choices of motifs
•
the screen «Edit 1» appears
•
the selected embroidery motif is shown in the most
appropriate (smallest possible) hoop
•
the «Hoop» on-screen button shows which
hoop should be attached
™
attach the recommended hoop
™
touch «OK» in the screen Edit 1 or press the
Quick Reverse button on head frame
•
embroidery computer moves to check if hoop is
attached
Embroidery Menu (Ready)
•
the Embroidery menu (Ready) opens with the
embroidery motif
•
the embroidery motif is ready to be embroidered
Starting to
Embroider
Attaching the Embroidery Hoop
Raising Needle and Embroidery Presser Foot
™
raise needle and embroidery presser foot
™
hold the hoop with the right side of the fabric
up and the attaching mechanism to the left
Attaching the Hoop
™
pass the hoop under the embroidery
presser foot
™
squeeze the ends of the attaching
mechanism on the side of the hoop
™
position the center points of the
hoop (small attachment clamps) over
the bracket of the embroidery arm
™
push the hoop down until it engages
™
release the attaching mechanism of
the hoop
Removing the Hoop
™
press both ends on the hoop
attaching mechanism towards each
other
™
pull up to remove the hoop
Note:
The last selected embroidery
motif is always positioned in the
center of the hoop.
032131.70.04_0509_a730_EN