20
126305 Rev B 05/22/15
If programming is complete press the right Soft Key next to “EXIT” on the display again and the module
will return to normal operation.
Figure 4.5 is an example of the Audit Events Report. This report shows the last 25 events that took
place. Notice that the event column (left side of report) reflects the three different types of events.
Figure 4.6 is an example of the Software Starts Report. This report only reflects the last 25 times that
the software reset. Notice that the event column (left side of report) reflects only the software starts
event.
Figure 4.7 is an example of the Clock Change Report. This report only reflects the last 5 times that the
RTC was reset. It has not reached the maximum 25 number of events. Notice that the event column
(left side of report) reflects only the clock changes event.
Service
(continued...)
FIGURE 4.5
-
All Audit Events
Report
Event
Date
Time
Sequence
Number
FIGURE 4.6
-
Software Starts
Report
Event
Date
Time
Sequence
Number
FIGURE 4.7
-
Clock Change Report
Event
Date
Time
Sequence
Number
