14
126305 Rev B 05/22/15
Figure 4.1
-
CPU Board
Service
Connector Functions:
All DC Voltages referenced in this document have a tolerance of +/
-
5%.
•
J1
-
Programming Header
For Bennett use only.
•
J4
-
Audio Transducer
Used to connect the speaker that is used to beep and prompt the user to respond to the module.
NOTE:
The +12v on Pins 1 and 2 is the same +12v that enters the CPU Board on Pins 1 and 2 of
J5.
NOTE:
The +5v on Pins 3 and 4 is regulated on the CPU Board using the +12v supplied on Pins
1 and 2 of J5.
