12
126305 Rev B 05/22/15
Programming
(continued...)
Manager’s Mode 94:
Manager’s Mode 94 is used to shift the screen text down a
line space on SP display for better viewing.
Once the module is in Manager’s Mode press the numeric [9]
and [4] keys and then press the function [Enter] key.
Once the function [Enter] key is pressed the display will show
the current setting for line shift (see figure 3.17).
To change the setting, press the numeric [1] key to turn ON
the line shift function. To turn this setting OFF, press the nu-
meric [0] key. Press the [Enter] key to save the value. (see
figure 3.17 and 3.18)
If programming is complete press the right Soft Key next to
“EXIT” on the display again and the module will return to nor-
mal operation.
Manager’s Mode 99:
There are thirty six different logos that can be displayed on
the Idle Prompt Screen.
This mode is used to set the logo on the bottom right corner
of the display (see figure 3.19). This logo can not be moved
nor can it be displayed while operating the module. This logo
can only be displayed on the Idle Prompt Screen.
Once the module is in Manager’s Mode press the numeric [9]
key twice and press the function [Enter] key.
Once the function [Enter] key is pressed the display will show
which logo is programmed, if any (see figure 3.20).
FIGURE 3.17
FIGURE 3.18
Figure 3.19
-
Bennett Logo
Figure 3.20
-
Mode 99
Logo 00 shows NO Logo
