RS7580V-601 Rotary-Screw Air Compressor
35
P/N 5900090 — Rev. A — Sept. 2019
4.
Put back the cleaned Oil Filter or install the new Oil Filter, then secure it.
If you require replacement parts, contact BendPak at
(800) 253-2363
, extension 191.
Changing the Separator Filter
The Separator Filter, located inside the Oil Separator Tank, needs to be cleaned and/or changed after
a certain number of hours of use: refer to the Maintenance Schedule.
⚠
WARNING:
Do not perform this procedure until a Maintenance Shutdown has been done and
you have taken steps to make sure the Compressor cannot be accidentally
re-connected to power.
To clean or change the Separator Filter
:
1.
Unscrew the two stainless steel pipes on the top of the Oil Separator Tank.
2.
Remove the copper pipe on the top of the Oil Separator Tank.
3.
Unbolt the flange cover of the Oil Separator Tank, then move it out of the way.
4.
Locate the Separator Filter and remove it.
5.
Clean or replace the Separator Filter, as necessary.
6.
Put the cleaned or new Separator Filter into place.
7.
Put the flange cover back into place and bolt it down.
8.
Re-install the copper pipe and the stainless steel pipes.
If you require replacement parts, contact BendPak at
(800) 253-2363
, extension 191.
Summary of Contents for RS7580V-601
