RS7580V-601 Rotary-Screw Air Compressor
13
P/N 5900090 — Rev. A — Sept. 2019
Installation
This section describes how to install your Compressor. Perform the steps in the order listed.
⚠
WARNING
Use only the factory-supplied parts that came with your unit. If you use parts from a
different source, you void your warranty and compromise the safety of everyone
who installs or uses the Compressor. If you are missing parts, visit
(800) 253-2363
, extension 191.
Safety Rules
When installing the Compressor, your safety depends on proper training and thoughtful operation.
⚠
WARNING
Do not install this equipment unless you have installation training. Always use
proper tools, such as a Forklift, to move heavy components. Do not install the unit
without reading and understanding this manual and the safety labels on the unit.
Only fully trained personnel should be involved in installing this equipment.
Pay attention at all
times.
Use appropriate tools and equipment. Stay clear of moving parts.
⚠
WARNING
You must wear OSHA-approved (publication 3151) personal protective equipment
at all times
when installing the Compressor: leather gloves, steel-toed work
boots, eye protection, back belts, and hearing protection.
Tools
You may need some or all of the following tools:
•
Two adjustable wrenches, one pipe wrench
•
Socket and ratchet set
•
Medium slot and Philips screwdriver
•
Forklift
•
Rotary hammer drill or similar
•
Masonry bits
The Electrician may require additional tools.
Summary of Contents for RS7580V-601
