BendPak RS7580V-601, Installation And Operation Manual, Page: 31 / 44

RS7580V-601 Rotary-Screw Air Compressor
31
P/N 5900090 — Rev. A — Sept. 2019
Changing Settings
While not all settings can be changed, many can. This section is an example of how to change
settings.
In this example, we will be changing the LOAD P setting, which controls the pressure at which the
Compressor goes into a loading state, from 014
5
PSI to 014
6
. This is not a big change; the purpose
is to demonstrate the process of changing a setting.
To change the LOAD P setting :
1. On the Main Screen, press Down (  ).
RUN PARA highlights.
2. Press Down (

).
USER PARA highlights.
3. Press Enter (  ).
P.T SET highlights.
4. Press Enter (

).
LOAD P: 0145PSI highlights.
5. Press Enter (

).
The Input Code screen appears.
6. Enter your User Pin, one number at a time.
7. Use Up (

) and Down (

) to change the number, use Enter (

) to move to the next digit.
8. When your User Pin is correct, press Set (S).
LOAD P: 0145PSI appears.
9. Press Enter (

).
The first number highlights; in our example, it’s the 0 in 0145.
10. Press Enter (  ) three times.
The 5 in 0145 highlights.
11. Press Up (

).
The 5 changes to a 6.
12. Press Set (S).
Do not press Set (S) until the value of the setting has been changed to what you want it to be.
The Compressor beeps; this tells you the setting has been changed.
13. Press Back (  ) three times to return to the Main Menu.