BendPak RS7580V-601, Installation And Operation Manual, Page: 29 / 44

RS7580V-601 Rotary-Screw Air Compressor
29
P/N 5900090 — Rev. A — Sept. 2019
• TIMER SET:
–
MOTOR START <time in seconds>. Not changeable. The time difference between when the
Compressor receives power and the motor starts.
– FAN START <time in seconds>. The temperature at which the Fan starts.
– STAR DELAY <time in seconds>. Not changeable. The time difference between when the
motor starts and the Compressor starts running.
– LOAD DELAY <time in seconds>. The time difference between when the Compressor starts
running and the unit starts taking in air.
– EMPTY DELAY <time in seconds>. The amount of time the Compressor stays in an Unloaded
state before switching to a Normal Stop state.
– STOP DELAY <time in seconds>. The amount of time the Compressor will wait after the Stop
button is pressed before shutting down.
– START DELAY <time in seconds>. The amount of time the Compressor will wait after the Start
button is pressed before starting up.
• OPERATION MODE
–
RUN MODE: LOCAL. Compressor is controlled by local settings (remote mode not supported).
– LOAD MODE: AUTO. Compressor goes from UNLOAD to LOAD automatically, based on
settings on the Compressor. MANU not supported.
– COM MODE: MODBUS. Not supported.
– COM ADD: 0001. Not supported.
• SEQ PARA. SET. All of these settings are not supported.
• CLR LIFE TIME
–
OIL FILTER: <time in hours>. Clears/resets the Oil Filter counter.
– O-A FILTER: <time in hours>. Clears/resets the Oil/Air Filter counter.
– AIR FILTER: <time in hours>. Clears/resets the Air Filter counter.
– LUBE: <time in hours>. Clears/resets the Lube counter.
– GREASE: <time in hours>. Clears/resets the Grease counter.
– BELT: <time in hours>. Clears/resets the Belt counter.
• MAX LIFE TIME
MAX RUN TIME (H)
–
OIL FILTER: 0490. Shows when you will be reminded to change the Oil Filter.
– O-A FILTER: 0490. Shows when you will be reminded to change the Oil/Air Filter.
– AIR FILTER: 0490. Shows when you will be reminded to change the Air Filter.
– LUBE: 0490. Shows when you will be reminded to change the Lube.
– GREASE: 0490 . Shows when you will be reminded to change the Grease.
– BELT: 0490 . Shows when you will be reminded to change the Belt.
• LAN. SEL: EN or CN. Select the desired language, English (EN) or Chinese (CN).
• NEW USER PIN ****
INPUT CODE: xxxx. Enter the desired new User Pin. The default is 1000.