
RS7580V-601 Rotary-Screw Air Compressor
34
P/N 5900090 — Rev. A — Sept. 2019
Oil Filter
See Comments.
The Oil Filter on a new Compressor should be changed
after the first 500 hours of use and every 6000 hours
after that.
Oil Separator Filter
See Comments.
The Oil Separator Filter, inside the Oil Separator Tank,
should be cleaned after the first 500 hours of use,
changed after 3000 hours, and then every 6000 hours
after that.
Oil
See Comments.
The Oil on a new Compressor should be cleaned after
the first 500 hours of use, changed after 3000 hours, and
then every 6000 hours after that.
⚠
WARNING:
Do not operate your unit if you find issues; instead, take it out of service, then
, visit
, or call
(800) 253-2363
, extension 196.
Changing the Air Intake Filter
The Air Intake Filter needs to be changed after a number of hours: refer to the Maintenance Schedule.
⚠
WARNING:
Do not perform this procedure until a Maintenance Shutdown has been done and
you have taken steps to make sure the Compressor cannot be accidentally
re-connected to power.
To change the Air Intake Filter
:
1.
Remove the Cover from the Air Intake Filter, then remove the Filter.
2.
If one of the thresholds mentioned above has been reached, replace the Filter.
3.
If you are just checking the Filter’s condition, clean it if it is in good condition; otherwise, replace it.
4.
Inspect the inside of the Filter housing; clean as necessary.
5.
Put the cleaned Filter back or install the new Filter.
6.
Replace the Cover and secure it.
If you require replacement parts, contact BendPak at
(800) 253-2363
, extension 191.
Changing the Oil Filter
The Oil Filter needs to be changed after a number of hours of use: refer to the Maintenance Schedule.
⚠
WARNING:
Do not perform this procedure until a Maintenance Shutdown has been done and
you have taken steps to make sure the Compressor cannot be accidentally
re-connected to power.
To change the Oil Filter
:
1.
Using a wrench if necessary, unscrew the Oil Filter and remove it.
2.
If one of the thresholds mentioned above has been reached, replace the Oil Filter.
3.
If you are just checking the Oil Filter’s condition, clean the threads and seat, then apply a light layer
of clean oil to the face of the Oil Filter seat.
Summary of Contents for RS7580V-601
