AV8OR User’s Guide
Aviation Mode Operation
VFR Moving Map Function
Pub. No D200803000008 Page 3-50 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Tap the
MORE INFO
soft key to see additional information about the
location. If additional pages are available, the
NEXT INFO
soft key
shows. When finished browsing the additional data, tap the
CLEAR
soft key to return to the WayPoint Entry Screen.
Tap the
OBS
soft key to start an
OBS
course and show the
magnetic heading from your present position to the WPT
.
Tap the
DIRECT TO
soft key to accept the entered location. The
system sets a new course from the aircraft’s present position directly
to the entered WPT’s position and shows the new Direct-To course
on the Map.
Re-center aircraft when Direct-To is already enabled
When flying on a course using the Direct-To function, if the aircraft
gets away from the course line on the map, the pilot can easily
create a new course line to the destination from the aircraft’s present
position by using the steps that follow:
Tap the
soft key from the Map page to display the virtual
keyboard. The active Direct-To destination will already be filled in on
the keyboard.
Figure 3-53: Re-center aircraft – Step 1
