BENDIXKing AV80R User Manual Download Page 334

Page: 334 / 359

AV8OR User’s Guide System Settings

Pub. No D200803000008 Page 6-2 Rev 3 Apr 2009

© Honeywell International Inc. Do not copy without express permission of

Honeywell.

Figure 6-2: Backlight Page

BACKLIGHT CONTROL BAR

To increase the brightness, tap the

icon. To decrease the

brightness, tap the

icon. You can also drag the

soft key

left or right or tap either side of the

bar.

BACKLIGHT SHUTDOWN SETTING

Select the wait time to turn off the backlight from the “Shut down the
backlight” list.

Tap the

icon to return to the Settings page.

VOLUME

Tap the “

Volume

” soft key on the Settings page to enter the Volume

page.

The settings on the Volume page control the volume of the touch-
screen operation and the Menu soft key tapping

This page allows the user to set the maximum volume for the unit.
The volume control knob on the left side of the unit can adjust the

Summary of Contents for AV80R








































































































































































































































































































































































Search results

Summary of Contents for AV80R

Reviews:

Related manuals for AV80R

Brands by name

Popular brands

BENDIXKing AV80R, User Manual

Search results

Summary of Contents for AV80R

Reviews:

Related manuals for AV80R

Brands by name

Popular brands