AV8OR User’s Guide
Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-144 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
To change values, double tap the highlighted value item or tap once
on the item to highlight it and then tap on the
Edit
soft key and a pop
up window shows the possible values that can be set. Highlight the
desired value and double tap it or tap the
Select
soft key to finish the
change.
Navigation Setup
The Navigation Setup page permits the navigation setup options to
be configured,
as shown in the figure below
.
.
Figure 3-182: System Setup – Navigation Setup
Tap the
SAVE & EXIT
soft key to save any changes. Tap the
RESET VALUES
soft key to restore most of the values to their
factory initial settings.
Double tap on an option or tap once on an option to highlight it and
then tap on the
EDIT
soft key to display a pop up window to show
the possible values that can be set. Double tap the highlighted value
or highlight the value and tap on the
SELECT
soft key to change the
item’s values.
•
AutoNav:
Enable the AutoNav function to allow AV8OR to
automatically switch between the external and internal GPS
sources when there is more than one source. The AutoNav
option only shows on the
Navigation Setup Page
when both the
