AV8OR User’s Guide
Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-140 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Figure 3-175: System Setup – Map System Setup Options
Tap the
NEXT
soft key to move to the next screen or the
SAVE &
EXIT
soft key to save any changes and go back to the previous
menu. Tap the
RESET VALUES
soft key to set all options to their
factory initial settings except Minimum Elevation when it is currently
set to a valid value.
The following list describes each Map System Setup option:
•
Orientation:
Sets the Map Mode presentation to either a
TRACK UP or NORTH UP orientation.
•
Extended Track Line:
Turns the extended track line ON or
OFF. The extended track line is drawn ahead of the aircrafts
present position in the direction of the present track.
•
Range Rings On Map:
Controls the display of the range rings
shown around the aircraft. OFF removes the rings. OUTER
RING shows only the outer ring. OUTER AND INNER RING
shows both rings.
•
Airport Label Format:
Labels airports in Map Mode either
with their ICAO CODE, their FULL NAME (given airport name)
or CITY NAME (local city name).
•
Auto Zoom:
Turns the auto zoom function ON or OFF. When
flying the last leg of a Flight Plan or when flying a Direct To,
the system automatically zooms to a screen range that keeps
the destination WPT within the display area. The system
continues to zoom in to the lowest zoom level. When the
lowest zoom has been reached and the aircraft begins to fly
