AV8OR User’s Guide
Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-159 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Figure 3-197: System Setup – Weather Status Page
The Weather Status column has the following fields:
•
Radio Serial Number – The ID of the XM receiver
•
Bit Error Rate – The rate of errors being received. The
bit error rate for at least the ground station of one of the
satellites needs to be below 60 to get a good signal.
•
Service Level – The subscription level of service that the
customer has purchased.
The Communication Status column has the following fields:
•
Receiving Data – A check mark indicates that data
(communication) is being received from the XM receiver.
A red “X” indicates that data is not being received.
•
Receiving Valid Data - A check mark indicates that valid
data (processed and useable weather data) is being
received from the XM receiver. A red “X” indicates that
received data is not valid.
Note:
If a green check mark is displayed under “Receiving Data”
and a Radio Serial number is displayed, then there is valid
communication between AV8OR and the weather receiver. A red
X under “Receiving Valid Data” indicates a critical problem. It
could mean a subscription problem (try the Refresh Mode update
procedure listed below) or a weather receiver failure.
When the XM receiver is first powered up, it may take 15 seconds
or longer to see the following indications:
