AV8OR User’s Guide
Automotive Mode Operation
Pub. No D200803000008 Page 4-109 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Type
Description
cannot reach the speed limit on them.
Toll roads
By default
GoDrive
includes toll roads (pay roads
where there is a peruse charge) in the routes. If you
disable toll roads,
GoDrive
plans the best toll-free
route.
Charge
roads
Charge roads are pay roads where you can purchase
a pass or vignette to use the road for a longer period
of time. They can be enabled or disabled separately
from toll roads.
Permit
needed
You might need a permit or permission from the
owners to use certain roads or to enter certain areas.
GoDrive
excludes these roads from the route
calculation by default.
Ferries
GoDrive
includes ferries in a planned route by default.
However, a map does not necessarily contain
information about the accessibility of temporary
ferries. You might also need to pay a fare on ferries.
Cross-
border
planning
In some cases the route calculated according to your
other navigation and route preferences would lead
through another country. If you wish to always stay
within the same country, turn this option off.
Carpool
lanes
This control appears only when navigating in the USA.
You should check whether you are allowed to use
carpool lanes before enabling this road type.
Route Calculation Method types
:
Option
Description
Fast
Gives the quickest possible route if you can
travel at or near the speed limit on all roads.
Usually the best selection for fast and normal
cars.
Short
Gives a route that has the smallest total distance
of all possible routes between the route points.
Usually practical for pedestrians, cyclists or slow
vehicles.
