AV8OR User’s Guide
Aviation Mode Operation
VFR Moving Map Function
Pub. No D200803000008 Page 3-47 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
The required bank angle to follow the arc will normally be between 3°
and 25° depending on the aircraft speed and the amount of course
change.
DIRECT-TO Navigation
Direct-To Navigation lets the user set a course line from his current
position to any other position. Direct-To Navigation can be done with
the methods that follow:
•
Create a Direct-To course from the Map.
•
Create a Direct-To course from the keyboard entry.
•
Re-center the aircraft when Direct-To is already enabled
•
Bypass a WPT with a flight plan active
•
Enter a new WPT with a flight plan active.
Create a Direct-To course from the Map
Pan and zoom in/out on the map to find the NAVAID point you want
to set a course to. Tap on the NAVAID point to show its name, more
detail information about the NAVAID point is shown by tapping the
MORE INFO
soft key,
as shown in the figure below
.
Figure 3-48: Map – Select a NAVAID
Tapping the
PTR MENU
soft key, on the right side of the screen,
shows the
soft key.
