AV8OR User’s Guide
Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-160 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
•
The bit error rates drop down (the lower the better)
•
The service level displays on the page
•
The “Receiving Valid Data” goes green
•
The WX icon in the lower left hand status window
displays the signal strength.
The bars on the WX icon in the status window
show the
strength of the incoming weather satellite signal.
•
Three bars indicates the strongest signal. All available
WX products will be received for the subscription level
that has been purchased.
•
Two bars indicates marginal reception. The NEXRAD
weather product may not be displayed.
•
One or no bars indicates that signal strength is too low
to receive weather product data.
Refresh Mode
The
REFRESH MODE
soft key is only available when “WxWorx”
is set as the Weather Type on the
.
The
REFRESH MODE
soft key provides the user with an easy
method to activate the WxWorx receiver.
Activation should only be necessary when the user is attempting
to use the receiver for the first time, the user has changed
subscription levels or the WxWorx receiver has become
deactivated for any reason.
To begin the activation process, the user either contacts WxWorx
technical support or uses their website. After all of the appropriate
data has been submitted or entered, the XM system will transmit
an activation message within the next 3 hours.
Tapping the
REFRESH MODE
soft key causes the AV8OR to
send commands to the WxWorx receiver that forces it into the
activation mode as long as the user remains on this page or taps
the
NORMAL MODE
soft key. When a Service Level is displayed,
the activation has been successfully completed.
