Belden Grass Valley Kaleido-Modular-X, Hardware Description & Installation Manual

Page: 72 / 96

72
Operation
KMX-3901-OUT Output Settings Panel
The navigation area contains buttons that control the contents of the main area.
• Click a button to access the associated features.
• Click the left side border (identified by a small arrow icon) to hide or reveal this area.
The operating control area contains the main operating controls for managing the Kaleido-
Modular-X multiviewer’s feature set. The contents change depending on the button you
clicked in the navigation area. The relevant panels are described individually in the
following sections:
• KMX-3901-OUT Output Settings Panel , on page 72
• KMX-3901-OUT Network Settings Panel , on page 74
• IPG-3901 Network Config Panel , on page 75
• IPG-3901 Gateway Config Panel , on page 76
• Info Panel , on page 78
KMX-3901-OUT Output Settings Panel
Set the resolution of the multiviewer output heads to an appropriate value based on the
displays in use. If a display uses EDID (Extended Display Identification Data) to
communicate its characteristics to the Kaleido-Modular-X multiviewer via the HDMI
connector, the matching can be done automatically, in which case the detected resolution
appears in the
Detected resolution box. Select the check box to use the detected
resolution. If the detected resolution is not used (either because the check box is not
selected or because the display does not make the information available) the value
selected in the
Output resolution list will be used.