75
Kaleido-Modular-X
Hardware Description & Installation Manual
IPG-3901 Network Config Panel
In the context of a Kaleido-Modular-X system with KMX-3901-IN-IP input/output cards, if
you wish to stream the system’s mosaic output to your TCP/IP network, then you must
configure network settings for the IPG-3901 module. These settings are available on the
IPG-3901 module’s
Network Config
panel, under the
Settings
tab. You may need to consult
your network administrator to get the correct values.
Type the appropriate IP address, mask and gateway information to configure the IPG-3901
module within your Ethernet network. Click
Apply
to set these values into the card, or
Cancel
to leave the original values unchanged.
Note:
These settings apply to the rear-panel Ethernet port of the KMX-3901-
IN-IP input/output cards;
not
to the Ethernet ports at the back of the CPU-
ETH3 frame controller card.
