57
Kaleido-Modular-X
Hardware Description & Installation Manual
status menu reports that an update is in progress, then you know that you should not
interrupt this process (by reseating the card, for example).
Input card power LED
Monitors the status of the 1.8V and 3.3V power supplies on board the KMX-3901-IN input
card.
SDI LEDs
This group of LEDs monitors the status of the 8 or 16 inputs (depending on card model) to
the KMX-3901-IN input cards. The frame door must be open for the LEDs to be visible.
ABT LED
This LED monitors the status of the ABT/MADI input on the KMX-3901-IN input cards.
REF LED
This LED monitors the status of the REF input on the KMX-3901-IN input cards.
Boot status LED 1
Monitors the status of the firmware.
LED
Meaning
Green
OK
OFF
Failure of the 1.8V or 3.3V on-board PSUs
LED
Meaning
Green
SD-SDI, HD-SDI or 3G input signal detected
Red
No input signal detected
LED
Meaning
Green
ABT/MADI signal detected
Red
No signal detected
LED
Meaning
Green
Black-burst or tri-level-sync signal detected
Red
No signal detected
LED
Meaning
Green
Normal (firmware has completed initialization and communication was
established with at least one output card)
Blinking orange
Error or no communication with an output card
Blinking green/red
Transitory state during firmware initialization
Red
Initial state
