64
Operation
Navigating the Local Control Panel Menu
Navigating the Local Control Panel Menu
The Kaleido-Modular-X has operating parameters which may be adjusted locally at the
controller card interface. Press the Select button
on the front edge of a Kaleido-Modular-X
input or output card
to assign the local control panel to operate the card.
The local control panel displays a menu that can be navigated using the four buttons
located next to the display. The functionality of the buttons is as follows:
If no controls are operated for 30 seconds, the controller reverts to its normal standby
status, and the selected card’s Status LED reverts to its normal operating mode. If a
parameter was changed on the card but not submitted (SEL was not pressed
or touched
)
and the 30 second timeout occurs, the parameters will be confirmed as if the SEL button
had been pressed
or touched
.
Note:
The KMX-3901-IN IP input modules comprise two cards: a KMX-3901-
IN-8-D input card, and an IPG-3901 SDI/IP gateway card, configured
separately through their respective menu.
[+] and [-] Used for menu navigation and value modification.
SEL
Gives access to the next menu level. When a parameter value is shown, pressing or
touching this button once enables modification of the value using the [+] and [-]
buttons; pressing or touching a second time confirms the new value.
ESC
Cancels the effect of parameter value changes that have not been confirmed;
pressing or touching ESC causes the parameter to revert to its former value.
Pressing or touching ESC moves the user back up to the previous menu level. At the
main menu, ESC does not exit the menu system. To exit, press the Select button on
the front edge of the card being controlled.
